|
Classification |
Dimensions
(A) |
Dimensions of top tape extension
(B) |
Dimensions of bottom tape extension(C) |
|
Closed-end zipper |
From the top end of the slider to the tip of the bottom stop |
From the top stop to the to the tip of notches of the cut end
 |
From the bottom stop to the tip of notches of the cut end |
|
|
|
Zipper with double sliders (arranged in head to head relation) |
From the tip of one bottom stop to the tip of the other bottom stop |
From the upper bottom stop to the tip of notches of the cut end
 |
From the tip of the bottom stop to the tip of notches of the cut end |
|
|
|
Zipper with double sliders (arranged in bottom-to- bottom relation) |
From the top end of one slider to the top end of the other slider |
From the top stop to the tip of notches of the cut end
|
Same as the top tape extention end portion |
|
|
|
Open-end zipper |
From the top end of the slider to the tip of the box |
From the top stop to the cut end
 |
|
|
|
|
Two way separator |
From the top end of the slider to the bottom end of the supplementary tape |
From the top stop to the cut end
 |
|
|
|
|
Top open zipper |
From the top stop to the tip of the box |
From the top stop to the cut end
|
|
|
|
|
Reversible slider |
Rather than from the top end, measurement should be made from the shoulder
inlet portion of the slider |
From the top stop to the cut end
 |
|
|
|
|
When the top stop does not enter the slider |
Measurement should be made from the top stop |
From the top stop to the tip of notches of the cut end
 |
|
